Go Back   FLAccords.com - The Florida Honda Accord Community > Technical > DIY
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Thread Tools Display Modes
Old 09-21-2015, 11:33 AM   #1
Junior Member
Join Date: Jan 2011
Location: North NJ 973
Posts: 15
Rep Power: 0 excalibur02 is on a distinguished road
Default cb9 wagon rear wiper upgrade

This is a simple DIY to upgrade your cb9 wagon rear wiper arm and blade. I hate the old fashioned look of the arm. My arm was just faded looking and I wanted to make it look sleeker.

I decided to look around at rear wipers from newer generation Hondas. I researched and found out the cb9 rear wiper length is 409mm. I then found the closest wiper length from a 3rd generation Odyssey 2005-2010 which is 400mm.

The loss of 9mm in length is not as much as you think.

Tools needed

1/4" Rachet
10mm Socket
Flat head screwdriver

Paper towels/newspaper

Parts needed

76720-SHJ-A01 Wiper Arm

76730-SHJ-A01 Wiper blade

94001-06080-0S Hex nut (to replace the old nut)

Now lets remove the old wiper arm. I dont have a picture of the old wiper blade installed as it fell off from the poor old design from way back.

With your flathead screwdriver pop off the cover to the arm, to then expose the nut.

Remove the nut with the 10mm socket. Once removed, slide off the old arm.

Should look like this

The black ring I should have painted it so its not faded, but that will be another day.

Here you can see the difference with the old arm and the new generation arm

It is about the same exact length.

Now put the new wiper blade to the new arm

at an angle slide the new blade

now after you have them together put the new assembly onto the stud for the wiper motor

Now you can put the new nut or the old nut onto the arm

tighten down as necessary.

push the cap from the new wiper arm to cover the nut

Now you are done and can admire the newer sleeker style wiper and arm.

I should also mention if you need to change your wiper you do not have to change the entire blade assembly. Just the actual blade insert which is oem part # 76622-S3Y-A01
My name is Mauricio aka Maury
excalibur02 is offline   Reply With Quote
Old 09-30-2015, 01:20 PM   #2
Boost Guru!
grumpys93's Avatar
Join Date: Jul 2008
Location: On top of your mama
Posts: 2,166
Rep Power: 13 grumpys93 is on a distinguished road
Send a message via AIM to grumpys93

pics no workie
*FLAccords Super Moderator*- Feel free to PM me with any questions
FSAE (F Series Accord Enthusiasts) ..."A dying breed thats taking it to the next level"

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
grumpys93 is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is On
Forum Jump

All times are GMT -5. The time now is 05:46 AM.

Powered by vBulletin®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
It's all ours. Bitch.